Taking air/fuel tuning to the next level, the Muzzy Digi-Tune
PRO uses the latest technology to provide one of the easiest and
methods of tuning the XP-900.
The Muzzy Digi-Tune PRO comes pre-programmed and optimized specifically for the
XP-900. There is no mapping or re-mapping necessary. Adjustments
for elevation and/or modifications can be done "on-the-fly" using
three buttons on the faceplate.
What sets the new PRO version apart from the standard Digitune is
the ability to remove fuel from the stock curve. Also included is a 0-5 volt input lead for future upgrade to closed loop* operation.
WHY IT'S BETTER:
The Digi-Tune is a load based fuel adder which works with
the factory ECU. The Digi-Tune's simple push button interface and
powerful load based technology renders complex table-based throttle
and RPM re-mapping systems a thing of the past.
The Digi-Tune ushers in the latest in tuning science – gone
is the old throttle position and RPM (Alpha-N) based tuning, replaced
by a powerful and highly effective LOAD BASED tuning methodology.
Load based tuning is superior to old school systems because different
CVT ratios place different loads on the engine. RPM and throttle
position based systems cannot tell the difference from
one ratio to another. The Digi-Tune knows the difference and adds
the proper amount of
fuel for every gear ratio, in every situation.
*Not compatible with all air/fuel meters. Air/fuel meter must have
0-5 volt output. Please specify Air/Fuel meter being used at time
of purchase. The Digi-tune